Question for John or any of the other consultants

Friendly format provided to inquire about automotive a/c systems.
Archived Forum

Moderators: bohica2xo, Tim, JohnHere

Post Reply
tbirdtbird
Preferred Member
Posts: 1448
Read the full article
Joined: Sat May 02, 2020 1:48 pm
Location: Texas

Question for John or any of the other consultants

Post by tbirdtbird »

Greetings, we have a 2019 Corolla in the shop which has a clutch less compressor, and the shaft has sheared.
Not having much experience with this type of compressor, I am seeking comments on such and also wondering if this is a common problem, and if there is a way to prevent it from happening.
Thanks
When considering your next auto A/C purchase, please consider the site that supports you: www.ACKits.com
User avatar
Tim
Site Admin
Posts: 1279
Joined: Tue Apr 12, 2016 2:19 pm
Location: Scottsdale, Arizona
Contact:

Re: Question for John or any of the other consultants

Post by Tim »

Give me a minute.
------------------------------
Please support ACKITS.com for your Auto A/C Parts and Tool needs.

Help Support the Forum
User avatar
Tim
Site Admin
Posts: 1279
Joined: Tue Apr 12, 2016 2:19 pm
Location: Scottsdale, Arizona
Contact:

Re: Question for John or any of the other consultants

Post by Tim »

Compressor shop claims. Not a known issue, they have seen. Mainly seals and loss of oil cause some internal stuff, but nothing that hits home as a regular failure.

You're the special one Dave. :)
------------------------------
Please support ACKITS.com for your Auto A/C Parts and Tool needs.

Help Support the Forum
User avatar
JohnHere
Preferred Member
Posts: 1555
Joined: Sun May 13, 2018 10:20 am
Location: South Carolina Upstate - USA

Re: Question for John or any of the other consultants

Post by JohnHere »

I've never seen that happen with a clutch-less variable-displacement compressor, either. Normally, the rubber ring should sheer and slip before the mainshaft snaps if the compressor seizes.

Could have been a sudden compressor seizure while the engine was running at higher RPM, or possibly, a metallurgically defective mainshaft.

I believe this car uses R-1234yf refrigerant. I wonder also whether PAG oil intended for use with R-134a was inadvertently added to this system, which takes a special PAG oil used with R-1234yf. Doing so might also cause sudden compressor seizure, resulting in breakage of the mainshaft.
Member – MACS (Mobile Air Climate Systems Association)

Thankful for the responses you have received? Please consider making a monetary donation to this Forum.
tbirdtbird
Preferred Member
Posts: 1448
Joined: Sat May 02, 2020 1:48 pm
Location: Texas

Re: Question for John or any of the other consultants

Post by tbirdtbird »

Thank you.
When considering your next auto A/C purchase, please consider the site that supports you: www.ACKits.com
Post Reply