newbie F'd up. what should I do.

Friendly format provided to inquire about automotive a/c systems.
Archived Forum

Moderators: bohica2xo, Tim, JohnHere

Post Reply
jayk2k333
Posts: 2
Read the full article
Joined: Sun Apr 24, 2022 11:27 am

newbie F'd up. what should I do.

Post by jayk2k333 »

So I GOOGLE AC refrigerant FOR 2016 Mustang it came back as 1234yf refrigerant. So I put 2 12oz. cans of that in my car then realize the system is actually 134a. Did I do any damage and what should I do if anything?
User avatar
Cusser
Preferred Member
Posts: 948
Joined: Sun Apr 24, 2016 6:29 am

Re: newbie F'd up. what should I do.

Post by Cusser »

jayk2k333 wrote: Sun Apr 24, 2022 11:32 am So I put 2 12oz. cans of that in my car then realize the system is actually 134a.
Two 12 oz. cans of R1234yf is pretty costly !!!!

Didn't you even look at the underhood sticker, which tells what type of refrigerant and system capacity ?????
tbirdtbird
Preferred Member
Posts: 1448
Joined: Sat May 02, 2020 1:48 pm
Location: Texas

Re: newbie F'd up. what should I do.

Post by tbirdtbird »

You bet. 8 oz is 45 bucks.
Plus fittings are left hand thread last I knew.
I am fairly certain the first year for any manufacturer in the USA to use the dreaded 1234yf was 2017. But that was not everyone.

While R-1234yf oils are backwards compatible with R-134a systems, R-134a PAG oils are not compatible with R-1234yf systems.

Whatever, do NOT run the compressor. I suggest a professional flush, vacuum, and recharge with proper oil and refrigerant. The 1234yf might cause the R134 PAG oil to sludge up

Also, the fact that it took 2 cans of refrigerant says that you have a massive leak that needs repaired

Let's face it, the EPA has made a horrible mess out of mobile AC in this country for years.
When considering your next auto A/C purchase, please consider the site that supports you: www.ACKits.com
DetroitAC
Preferred Member
Posts: 269
Joined: Mon Oct 17, 2016 10:33 am
Location: SE Michigan

Re: newbie F'd up. what should I do.

Post by DetroitAC »

Not a big deal as far as I know. PAG used for 1234yf is slightly better miscibility, still a PAG. The knuckle heads on the SAE committee that wrote standards for Yf blew things way out of proportion IMO.

Don't sweat it too much, recover the YF, charge it properly with 134a.
jayk2k333
Posts: 2
Joined: Sun Apr 24, 2022 11:27 am

Re: newbie F'd up. what should I do.

Post by jayk2k333 »

thanks for the advice. $115 worth 1234yf and adapter, wasted some money and payed the stupidity tax. lesson learn.
User avatar
JohnHere
Preferred Member
Posts: 1555
Joined: Sun May 13, 2018 10:20 am
Location: South Carolina Upstate - USA

Re: newbie F'd up. what should I do.

Post by JohnHere »

It's also worth mentioning not to use refrigerant containing sealers or other additives. Use only pure refrigerant.
Member – MACS (Mobile Air Climate Systems Association)

Thankful for the responses you have received? Please consider making a monetary donation to this Forum.
Post Reply