Low side hose pinches when pulling a vacuum

Friendly format provided to inquire about automotive a/c systems.
Archived Forum

Moderators: bohica2xo, Tim, JohnHere

Forum rules
Post Reply
DetroitAC
Preferred Member
Posts: 269
Read the full article
Joined: Mon Oct 17, 2016 10:33 am
Location: SE Michigan

Re: Low side hose pinches when pulling a vacuum

Post by DetroitAC »

Sorry I didn't see this sooner. It's normal for newer GM suction hoses to collapse. Their new hoses are very soft, very good for reducing noise in the cabin, they collapse flat when you pull a vacuum.
Top
User avatar
Tim
Site Admin
Posts: 1279
Joined: Tue Apr 12, 2016 2:19 pm
Location: Scottsdale, Arizona
Contact:
Contact Tim

Re: Low side hose pinches when pulling a vacuum

Post by Tim »

DetroitAC wrote: ↑Wed Nov 10, 2021 6:20 pm Sorry I didn't see this sooner. It's normal for newer GM suction hoses to collapse. Their new hoses are very soft, very good for reducing noise in the cabin, they collapse flat when you pull a vacuum.
Even with the barrier inside? Seems that the plastic sleeve was not crushable just a few years ago.
------------------------------
Please support ACKITS.com for your Auto A/C Parts and Tool needs.

Help Support the Forum
Top
DetroitAC
Preferred Member
Posts: 269
Joined: Mon Oct 17, 2016 10:33 am
Location: SE Michigan

Re: Low side hose pinches when pulling a vacuum

Post by DetroitAC »

Yeah, it used to be unthinkable that it could collapse. I replaced the condenser in my 2015 Silverado and peed my pants when I saw that hose
Top
User avatar
Tim
Site Admin
Posts: 1279
Joined: Tue Apr 12, 2016 2:19 pm
Location: Scottsdale, Arizona
Contact:
Contact Tim

Re: Low side hose pinches when pulling a vacuum

Post by Tim »

DetroitAC wrote: ↑Thu Nov 11, 2021 7:02 am Yeah, it used to be unthinkable that it could collapse. I replaced the condenser in my 2015 Silverado and peed my pants when I saw that hose
I'll have to look into if the bulk hose is the same. Could be some import hose maker using an inferior hose.
------------------------------
Please support ACKITS.com for your Auto A/C Parts and Tool needs.

Help Support the Forum
Top
User avatar
JohnHere
Preferred Member
Posts: 1555
Joined: Sun May 13, 2018 10:20 am
Location: South Carolina Upstate - USA

Re: Low side hose pinches when pulling a vacuum

Post by JohnHere »

For what it's worth, I have never seen or heard of any A/C barrier hose collapsing inward like that under vacuum.
Member – MACS (Mobile Air Climate Systems Association)

Thankful for the responses you have received? Please consider making a monetary donation to this Forum.
Top
Post Reply

Return to “Automotive Air Conditioning Forum”