Low Pressure Switch

Friendly format provided to inquire about automotive a/c systems.
Archived Forum

Moderators: bohica2xo, Tim, JohnHere

Post Reply
OleBones1953
Posts: 3
Read the full article
Joined: Sat Jul 11, 2020 12:54 am

Low Pressure Switch

Post by OleBones1953 »

New to forum and trying to get my 2002 Chevy Silverado AC working. Is it necessary to evacuate the system to replace the low pressure switch?
User avatar
Tim
Site Admin
Posts: 1279
Joined: Tue Apr 12, 2016 2:19 pm
Location: Scottsdale, Arizona
Contact:

Re: Low Pressure Switch

Post by Tim »

No, if you speaking of the switch on the accumulator.
------------------------------
Please support ACKITS.com for your Auto A/C Parts and Tool needs.

Help Support the Forum
User avatar
JohnHere
Preferred Member
Posts: 1555
Joined: Sun May 13, 2018 10:20 am
Location: South Carolina Upstate - USA

Re: Low Pressure Switch

Post by JohnHere »

I'm curious as to why you think the LP switch is bad. Are there any other components that you suspect might be leaking and/or defective as well? If so, and if the system hasn't been serviced in years, I'd go ahead and recover the charge, or have it done, then repair and replace whatever is necessary.
Member – MACS (Mobile Air Climate Systems Association)

Thankful for the responses you have received? Please consider making a monetary donation to this Forum.
OleBones1953
Posts: 3
Joined: Sat Jul 11, 2020 12:54 am

Re: Low Pressure Switch

Post by OleBones1953 »

About half of the time I have to jump it out to get the clutch to kick in and that is on a fresh charge. Have checked the connector and wiring and it all looks good.
OleBones1953
Posts: 3
Joined: Sat Jul 11, 2020 12:54 am

Re: Low Pressure Switch

Post by OleBones1953 »

Tim wrote:No, if you speaking of the switch on the accumulator.
Thanks for the reply.
User avatar
JohnHere
Preferred Member
Posts: 1555
Joined: Sun May 13, 2018 10:20 am
Location: South Carolina Upstate - USA

Re: Low Pressure Switch

Post by JohnHere »

Have you also checked the clutch gap with a feeler gauge? If it's wider than 0.020", the clutch might not engage, especially an older unit when it heats up.
Member – MACS (Mobile Air Climate Systems Association)

Thankful for the responses you have received? Please consider making a monetary donation to this Forum.
Post Reply