I was splashing the condenser with water to pull heat off and all my fans are working.

How would I test this condenser issue? Spray it with the garden hose constantly?

Bump......
Please I need help.

I threw a full cup of water on the condenser. It dropped about 50psi on the high side.

1500 rpm and the vehicle was sitting. I was occasionally throwing a cup of water on the condenser.

I forgot to add that my gauge readings are 33 on the low side and high side is 235. Any help would be greatly appreciated because I am struggling

Okay so I have replaced the Compressor the Condenser (Condensor was from junk yard) I have also replaced the expansion vave and the receiver dryer I have entirely flushed the system. So the first time I vacuumed for 20 minutes and charged it approximately the 27 ounces it calls for. I ran the system...

Thank you wptski

If I decide to go that route or the pressurized can route is it okay to install the compressor dry? or should I put like one once in the compressor install it then vacuum the system and add the other 6 ounces with the pressurized can?

I have a 1992 toyota 4runner with a 4cylinder. I am replacing the condensor, compressor, and receiver. I plan on flushing the entire system with flush solution. through my research I learned there are two ways of adding oil. 1. would be to pour (liquid) half in the compressor and half in the receive...