As an "old" Chevy guy, they should have stuck with the A6 it was a beast. Every car/truck I have ever had with the R4, I had issues with. My 1998 GMC service truck, with the HT6, it's been good to me, and will still freeze you out. :mrgreen: Hey Tim and John, yes I'm still breathing @72. :...

Tim, like you, I doubt it was from here, more than likely from me letting chrome store my passwords, I finally wised up and stopped that. Now I just write them down. Mr. Bill

JohnHere wrote: ↑Sun Mar 31, 2024 6:32 am

Mr Bill wrote: ↑Sat Mar 30, 2024 6:46 am John, read my last post, where I quoted Tim. Thanks! Mr. Bill

Yes, I did. Does that mean someone hacked your Forum avatar and login?

John, this is my guess, but I did go in and change my password. Thanks Bill

I had a similar issue with my Kubota B2601. It sounds like there could be a problem with the expansion valve or maybe a refrigerant flow issue. In my case, it turned out to be a malfunctioning expansion valve that wasn't regulating the refrigerant flow properly, causing abnormal pressure readings. ...

I had a similar issue with my Kubota B2601. It sounds like there could be a problem with the expansion valve or maybe a refrigerant flow issue. In my case, it turned out to be a malfunctioning expansion valve that wasn't regulating the refrigerant flow properly, causing abnormal pressure readings. ...

I had a similar issue with my Kubota B2601. It sounds like there could be a problem with the expansion valve or maybe a refrigerant flow issue. In my case, it turned out to be a malfunctioning expansion valve that wasn't regulating the refrigerant flow properly, causing abnormal pressure readings. O...

cvetteman wrote:I do not see a connector on the high pressure AC Line, so where do I connect my manifold gauges?

Should be to the left of the accumulator, small line with port sticking up.

This is the same fitting I found on a YouTube video, the o-ring looks about the same.

It could be the bolt in the accumulator is bent back some, I think if it were bent more towards the hole/opening it would set more flush. You could try a washer under the nut,don't know if that might help. that's a very poor design, at least what would have probably been be better is, if they would ...

ice-n-tropics wrote:Suction side filters are available but do not filter the fines.
hotrodac

They don't make an inline high side filter?